Special Product Features; Initial Operation - Metabo SB 710 Manual Original

17027063_1110 SB_Bauk10.book Seite 12 Dienstag, 23. November 2010 2:03 14
ENG ENGLISH
with both hands using the handles provided, stand
securely and concentrate.
The Metabo S-automatic safety clutch must not be
used for torque control.
Caution must be exercised when driving screws
into hard materials (driving screws with metric or
imperial threads into steel)! The screw head may
break, or a high reverse torque may build up on the
handle.
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory
diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chro-
mate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
5 Overview
See page 3 (please unfold).
1 Thumbwheel for gear selection
2 Additional handle / Additional handle with
vibration damping *
3 Depth stop
4 Geared chuck*
5 Futuro Plus keyless chuck *
6 Futuro Top keyless chuck*
7 Slide switch (drilling/impact drilling)
8 Speed preselection setting wheel*
9 Setting wheel for setting torque control and
impulse function *
10 Electronic signal indicator*
11 Rotation selector switch *
12 Locking button for continuous activation
13 Trigger switch
* depending on equipment

6 Special Product Features

Metabo S-automatic safety clutch:
If the tool jams or catches, the power supply to the
motor is restricted. Due to the strong force which
can arise, always hold the machine with both
12
All manuals and user guides at all-guides.com
hands using the handles provided, stand securely
and concentrate.
Auto-stop carbon brushes:
If the carbon brushes are completely worn, the
machine switches off automatically. SBE 1100
Plus: An LED lights up before the carbon brushes
wear out completely.
Restart protection:
(SBE 1100 Plus, SBE 1000)
Restart protection prevents the unintentional start-
up of the machine when it is reconnected to the
mains or when power returns following a power
failure.
Overload protection display:
(SBE 1100 Plus)
The overload protection display indicates if the
machine is overloaded.
Metabo impulse function:
(SBE 900 Impuls)
For effortless driving and removal of stubborn
screws, even with damaged heads. For spotlessly
clean drilling without a centre punch - in tiles,
aluminium or other materials.
Electronic torque control:
(SBE 900 Impuls)
When driving small screws and when thread
tapping with taps of small diameter, the torque
may be reduced to a value appropriate to the work
being carried out.
stated on the rating label, match with your power
supply.
screwdriver to firmly tighten the safety screw
inside the drill chuck (if applicable / model-
specific). Caution left-handed thread !
(see Section 8.12.)
7.1
Open the clamping ring by turning the additional
handle (2) counter-clockwise. Push the additional
handle onto the collar of the machine. Insert depth
stop (3). Slide the additional handle far enough
forward so that it can be turned. At the desired
angle, pull it back and tighten firmly.

7 Initial Operation

Before plugging in, check that the rated
mains voltage and mains frequency, as
To ensure that the drill chuck is securely
fitted: After initial drilling (clockwise), use a
Assembly of additional handle (2)
For safety reasons, always use the additional
handle supplied.