INITIAL STARTUP OF THE CONCENTRATOR
NOTE: Concentrator may be used during initial warm-up time (approximately
30 min.) while waiting for the GREEN light to illuminate.
When the unit is initially turned on, the GREEN power LED (I/O) will illumi-
nate. Within 5 to 30 minutes after initial startup, a GREEN light will illuminate
in the Oxygen Purity section of the Control Panel (FIGURE 6) if concen-
tration is within specification. Any other SensO
will signal a condition that requires a call to the supplier.
OPERATION / MAINTENANCE
EXPLANATION OF INDICATOR LIGHTS:
EXPLANATION OF INDICATOR LIGHTS:
EXPLANATION OF INDICATOR LIGHTS:
EXPLANATION OF INDICATOR LIGHTS:
EXPLANATION OF INDICATOR LIGHTS:
O
unless instructed otherwise by your supplier. Call Supplier
. Be certain that
- Total unit shutdown. Switch
to
- with
sensor malfunctioning; you may continue to use the concentrator. Call
Supplier
Normal
FIGURE 6 - O
NOTE: LX models built AFTER 12/2000 include a red "fault" indicator
(
) on the control panel. Switch immediately to a back-up oxygen supply
and call supplier when illuminated.
OPERATION / MAINTENANCE
- Normal Operation
2
- You may continue to use the concentrator
supply. Call Supplier
.
Oxygen Purity
O
2
DISPLAY CONTROL PANEL
2
17
® indicator lights illuminating
2
is nearby.
- Oxygen
RED
YELLOW
GREEN
.