Renson 159702 Traducción De Las Instrucciones Originales página 81

HOW TO AVOID DAMAGING SURFACES
12
WARNING
12.1 Using the appliance to wash tyres may damage the tyre and can be dangerous.
12.2 Never point the high pressure jet straight at the tyre.
12.3 Always use the appliance at the lowest pressure setting when cleaning in the vicinity of wheels and tyres.
12.4 Never use the "Turbo Lance" for washing any part of the vehicle.
12.5 For further information refer to section: "8.7 Recommended cleaning procedure".
EC Declaration of Conformity
We RENSON International RAILLENCOURT SAINTE-OLLE France declare that
the following UR Machine(s):
Designation of Machine
Model No / Type
Input power
conform(s) to the following European Directives:
2006/42/EC, 2014/35/EU, 2011/65/EU, 2012/19/EU, 2014/30/EU and
2000/14/EC
and are (is) manufactured in accordance with the following standards or
standardised documents: EN 60335-1; EN 60335-2-79; EN 55014-1;
EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 61000-3-11; EN 60704-1; EN
62233; EN 50581
Name and address of the person in charge to give the technical file:
Fabien Hoin / RENSON General Manager - ZA de l'A2-Actipole 59.554
RAILLENCOURT SAINTE-OLLE, France
The conformity assessment procedure required by Directive 2000/14/EC
was in accordance with annex V
Measured Sound Power Level:
Guaranteed Sound Power Level: 90 dB (A)
Date : 19.05.2016
RAILLENCOURT SAINTE-OLLE (F)
Fabien Hoin
The validity of the warranty is in accordance with the relevant legislation in the country where the product is sold (unless otherwise stated by the producer).
The warranty covers materials, construction and conformity defects during the warranty period, during which time the manufacturer will replace defective
parts and repair the product if not excessively worn, or replace it.
The warranty does not cover components subject to normal wear and tear (valve, piston, water gasket, oil gasket, springs, O-rings, accessories such as the
hose, gun, brushes, wheels, etc.);
The warranty does not cover defects caused by or arising from:
- improper use, misuse, negligence,
- hire or professional use if the product has been sold for domestic use,
- failure to comply with the maintenance instructions provided in this manual,
- repair by unauthorised staff or centres,
- use of non-genuine parts or accessories,
- damage caused by transport, by dirt or foreign bodies, accidents,
- storage or warehousing problems.
Proof of purchase must be submitted to obtain warranty cover.
For assistance, contact the point of sale where your appliance was purchased
High Pressure Washer
159702
3,1 kW
89 dB (A)
General Manager
Technical Data
Flow rate
Maximum flow rate
Pressure
Maximum pressure
Power
Maximum inlet temperature
Maximum inlet pressure
Gun repulsive force at maximum
pressure
Pump oil type
Protection class
Motor insulation
Motor protection
Voltage
Maximum permitted electrical system
impedance
Sound pressure level
L (EN 60704-1)(K = 3 dB(A))
PA
Sound power level
L (EN 60704-1)(K = 3 dB(A))
WA
Appliance vibration
(K = 1 m/s ):
2
Weight
Subject to technical modification!
WARRANTY
English
Technical Data
Unit 159702
l/min
l/min
MPa 14
MPa 16
kW 3,1
°C 60
MPa
N 25,9
kg
I /
-
- Class F
- IPX5
V / Hz 230 / 50
Ω
dB (A) 82
dB (A) 90
m/s 2 4,91
kg 32
25
EN
9
-
1
-
-