Marmitek IPTV Coax Pro Modo De Empleo página 6

4. INSTALLATION
When installing the IPTV Coax Pro™ nodes, use as few splitters,
connectors, converters, amplifiers and other connections as possible. Each
component that is added to the coaxial network will weaken the coaxial
signals to some extent.
4.3 Connecting the 1P-node (in the meter cupboard)
With the exception of the built-in 4-port Ethernet Switch, there are no
technical differences between the IPTV Coax Pro™ 1P-node and the 4P-
node. In most cases, the 1P-node will be placed in the meter cupboard or at
the Demarcation Point (DMARC) where your coaxial cable and internet
connection enter your home. You can then use the 4P-node to connect up
to 4 devices with a network connection (internet/IP).
6 © MARMITEK