Checking The Installation - Marmitek IPTV Coax Pro Modo De Empleo

4.5 Checking the installation

To verify correct installation, a number of checks need to be performed on
both the 1P-node and the 4P-node.
1. Check that the POWER lamp is lit, indicating the node is powered.
2. Check that the LINK light is lit, indicating the 1P-node is connected
correctly to the 4P-node.
3. Check that the SIGNAL QUALITY light turns green, indicating the
signal quality between the 1P-node and the 4P-node is very good.
4. Check that the LAN light is lit or flashing, indicating that the unit is
connected or data is being transferred, respectively.
In all other cases, please refer to Chapter 5, Frequently Asked Questions.
4.6 Use of the LPF-1000 coaxial filter
If you use analogue or digital television via a coaxial cable, we recommend
using the supplied coaxial filter. This filter prevents network signals from
leaving your house (security) and reflects the signal back into the coaxial
network, improving the signal quality. This filter does not affect your existing
coaxial signals such as TV, radio and telephony. Position the coaxial filter
directly at the point where the coaxial cable enters your home.
IPTV Coax Pro™ 9