ENGLISH
INTRODUCTION
" EUREKA S.r.l." , leaders in the production of sweeping machines,
are pleased to welcome you as an owner of the " KOBRA" sweeper
machine. We are sure that its use will give you great satisfaction. We
are also sure that while working with the KOBRA you will have the
opportunity to check the quality, solidness, and many applications for
its use. The " KOBRA" sweeper machine is suitable for the cleaning
of little and large surfaces, for private, industrial and public use. In
this handbook are described and shown various operations of
installation, control and maintenance, necessary to keep your KOBRA
in perfect working order. These are normal maintenance operations,
which any operator can carry out with means normally available. In
the case of work requiring special use or a check of the internal parts,
You should contact your nearest EUREKA S.r.l. service point.
BEFORE USING THE MACHINE, CAREFULLY READ THIS
MANUAL AND KEEP IT WITHIN EASY REACH FOR FURTHER
CONSULTATION.
The observance of the instructions given in this manual, and a cautions
operator, are the best guarantee against accidents which may occur
while working with the machine. The sweeping machines produced by
EUREKA S.r.l. are designed according to the latest safety
requirements, but they must be used following these instructions.
GENERAL NOTE
Our company aims towards a constant perfectioning of its machines
and reserves the right to carry out modifications and improvements
whenever necessary without being to carry out the same operations on
previously sold machines .
WARNING AND RECOMMENDATIONS
IMPORTANT POINTS FOR THE SAFETY OF ALL THE PEOPLE
INTERESTED IN THE USE OF THIS SWEEPER " KOBRA".
• THE SWEEPER HAS BEEN DESIGNED FOR THE CLEANING
OF DRY FLOORS.
• DO NOT WORK IN THE PRESENCE OF TOXIC POWDERS.
• DO NOT WORK IN ENVIRONMENTS WHICH MAY BE
UNDER RISK OF EXPLOSION.
• DO NOT COLLECT MATERIAL AND ALL THAT MAY LEAD
TO FIRE (FOR EXAMPLE LIGHTED CIGARETTES).
• NEVER ALLOW ANYONE TO ENTER THE SWEEPER'S
OPERATING AREA.
• NEVER
LEAVE
THE
RUNNING; TURN THE ENGINE OFF AND TAKE THE KEY
AWAY.
• NEVER OPEN THE PROTECTIVE COVERS WHEN THE
SWEEPER IS RUNNING.
• MAINTENANCE OPERATIONS SHOULD ONLY BE CARRIED
OUT WITH THE ENGINE TURNED OFF.
• ONLY OPERATE THE SWEEPER FROM THE DRIVING SEAT.
• DO NOT ATTEMPT TO WORK ON SLOPES WHOSE
GRADIENTS EXCEED THE VALUE SHOWN ON THE TABLE.
• DO NOT USE THE MACHINE FOR THE CLEANING OF
OBJECTS.
• THE MAIN BRUSH MUST NOT SWEEP UP WIRES, ROPES,
OR ANY OTHER LONG MATERIAL THAT MAY GET
TANGLED WITH IT.
• DO NOT CARRY OUT ANY MODIFICATION TO THE
MACHINE WITHOUT OUR PREVIOUS AUTHORISATION.
• THE SWEEPER HAS NOT BEEN APPROVED FOR USE ON
THE PUBLIC HIGHWAY.
N.B.
EUREKA S.r.l. Declines all responsibility for any damage to
person and/or property caused by a failure to observe the above rules
or resulting from the inappropriate or incorrect use of the sweeper.
The sweeping machines manufactured by EUREKA follow the CE
directory and show the label :
All manuals and user guides at all-guides.com
SWEEPER
WITH THE ENGINE
DESCRIPTION OF PICTURES
PIC.1
A. TRACTION LEVER.
B.
FLAP LEVER
C.
TRACTION ADJUSTMENT SCREW
D. FLAP LEVER ADJUSTMENT SCREW
E.
HANDLE ADJUSTMENT SCREW.
PIC.2 KOBRA E
A. SIDE BRUSH HANDLE
B.
VACUUM CUT-OFF HANDLE
C.
KEYSWITCH
D. LOW BATTERY CHARGE WARNING LIGHT
E.
FUSE BOX AND FUSE 50Ah
F.
MOTOR CONNECTOR
G. BATTERY
H. FIXED BATTERY CONNECTOR
PIC.3 KOBRA ST "BRIGGS & STRATTON" MODEL
A. SIDE BRUSH HANDLE
B.
VACUUM CUT-OFF HANDLE
C.
OIL EXHAUST HOSE
D. MOTOR SPARK PLUG
E.
BENZIN TANK LID
SWITCHING OFF BUTTON
F.
PIC.4 KOBRA ST "HONDA" MODEL
A. SIDE BRUSH HANDLE
B.
VACUUM CUT-OFF HANDLE
C.
OIL LEVEL ROD
D. MOTOR SPARK PLUG
E.
OIL EXHAUST HOSE
F.
BENZIN TANK LID
SWITCHING OFF BUTTON
G.
PIC.5
A. CLEAN PATH
PIC.6
A. FILTER COVER
B.
CLAMP
C.
BAG FILTER
D. STEEL BAR
E.
FILTER-SHAKER LEVER
PIC.7
A. DIRT CONTAINER
B.
MAIN BRUSH BLOCKING SCREW
C.
MAIN BRUSH
D. MAIN BRUSH PRESSURE ADJUSTMENT SCREW
PIC.8
A. SIDE BRUSH ADJUSTMENT SCREW
B.
SIDE BRUSH
C.
SIDE BRUSH BLOCKING SCREW
D. FRONT WHEEL BRAKE LEVER
E.
UNBLOCKING BRAKE LEVER
KOBRA ST "BRIGGS & STRATTON" MODEL
Warning!For the maintenance and the correct use of the engine
carefully read the original manual supplied by "Briggs & Stratton" and
strictly follow the instructions in it .
STARTING THE ENGINE.
Place the accelerator lever in "MAX" position.
Move the choke (consult the "BRIGGS & STRATTON" manual) to
"CHOKE" position (NB: Don't use the choke if the engine is warm
or the air temperature is high).
Pull rope rapidly to overcome compression and prevent kickback.
Repeat if necessary with choke slightly pulled.
When the engine starts, slowly pull the choke control.
NOTE: THE ENGINE HAS BEEN PRE-SET AT 3100 RPM
STOPPING THE ENGINE N°1
Keep pushed the switch (pic.3-pos.F)until the engine cuts out.
STOPPING THE ENGINE N°2
Place the accelerator lever in "STOP" position.
KOBRA ST "HONDA" MODEL
7