Network Connection - HP mp200 Manual Del Usuario

SPDIF connection:
Either the Basic/Advanced connection or the HDMI connection can also be used with the
SPDIF connection. This connection provides 5.1 audio data to the SPDIF receiver, and then
the receiver decodes it into 5.1 audio outputs.
TOSLINK cable: Connect the optical cable from this port to the SPDIF input of the audio
receiver. When connecting via SPDIF, the analog stereo audio connection isn't required.
Multichannel audio setting: To obtain multichannel audio via SPDIF, configure the
mp200 audio output to SPDIF RAW.

Network connection:

Choose wired (Ethernet) for the network connection. If you have purchased the optional
wireless USB adapter*, you can plug that into the USB port on the front of the mp200, and
then select wireless for the network connection.
* ZW-N290
All manuals and user guides at all-guides.com
9