Product Overview; Front Panel; Back Panel - HP mp200 Manual Del Usuario

front Panel

LED/button/connector:
1. USB port: These two USB 2.0 type A sockets can be used to connect an external
USB Flash Drive, USB Hard Drive, USB DVD-ROM, or USB Flash Card Reader.
2. IR sensor: This is the port that receives commands from the remote control. Please
make sure not to block the port.
3. USB indicator:
to become ready.
4. Power indicator:
on.
5. POWER STANDBY:
up from standby.

Back Panel

Video connection: Please select one of the following connections in order to connect
the mp200 video to your TV set.
HDMI output: This high definition port can be used to connect the mp200 with your
HDMI receiver or HDMI TV set. This is the preferred connection method.
All manuals and user guides at all-guides.com
2
1
When plugging in a USB device, it may take up to 5 seconds for it
Lights up when the power is plugged in, and the device is turned
Press this button to put the mp200 into standby or to wake it
4

Product overview

3 4 5