Publicidad
Idiomas disponibles
Idiomas disponibles
Status
The service indicator blinks red.
3.5 Items supplied
Rotary hammer, side handle, operating instructions.
4 Technical data
When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
Rated current input
Weight in accordance with EPTA proce-
dure 01/2003
Single impact energy in accordance with
EPTA procedure 05/2009
Ø Hammer drill bits
Ø Drill bits for wood
Ø Drill bits for metal
4.1 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values determined in accordance with EN 60745-2-6
Sound (power) level (L
Uncertainty for the sound power level (K
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration (vector sum of three directions), measured in accordance with EN 60745-2-6
Hammer drilling in concrete (a
Uncertainty (K)
Printed: 01.06.2017 | Doc-Nr: PUB / 5354918 / 000 / 00
Note
You can find other system products approved for use with your product at your local Hilti Center or
online at: www.hilti.group.
Note
For details of the rated voltage, current, frequency and/or input power, please refer to the power tool's
country-specific type identification plate.
)
WA
)
pA
)
h, HD
Meaning
•
Have the rotary hammer repaired by Hilti Service
if necessary.
9.9 A
8.3 kg
11.5 J
12 mm ... 45 mm
10 mm ... 32 mm
0 mm ... 20 mm
113 dB(A)
)
3 dB(A)
WA
102 dB(A)
)
3 dB(A)
pA
10 m/s²
1.5 m/s²
English
5
Publicidad
