Overheat Protection - ECRON PTC907Y-L Manual De Usuario

VENTILATION
For the ventilation mode, turn the temperature control knob (2)
to the maximum position. In a lower position, the ventilation
mode may not work.
OSCILLATION
Turn on and off oscillation function using the oscillation switch at
the back of the heater.

OVERHEAT PROTECTION

EN
- In the event of abnormal overheating, a safety device will
automatically stop the appliance heating. After a short cooling
down phase, the appliance will be ready for heating again.
- If you still notice the same defect as above mentioned, remove
the plug from the socket and consult your authorized dealer to
your after-sales service department.
- During use, do not touch or cover the air outlet. This may cause
the unit to overheat, and the safety device
33