Scanning Guidelines - WizCom Technologies Quicktionary TS Manual Del Usuario

All manuals and user guides at all-guides.com
Select Dictionary
When selecting a dictionary, the source language
defines the language of the text to be scanned. Selecting
the French to English dictionary indicates that the text
scanned should be French, and that the target language,
or translation, will be English.

Scanning Guidelines

Scanning Mode
The Pen is in scanning mode when the red light at the tip
of the Pen is blinking. Scanning mode is disabled when
you are not in the Quicktionary application, or when
accessing a toolbar menu.
Scanning Restrictions
The Pen scans and recognizes printed text in a wide
range of languages, font types and point sizes (6-22
points, up to 8mm) and in a variety of colors on
contrasting backgrounds (except red on white, white on
red, blue on black and black on blue).
It does not recognize handwriting, cursive fonts,
mathematical symbols or other profession-specific signs.
Troubleshooting Poor Character Recognition
Poor character recognition may occur for the following
reasons:
Low quality scanning material.
The scanning settings are not set correctly (e.g.
Inverse).
Holding the Pen at the wrong scanning angle.
Scanning too fast.
Tips for Good Scanning
To ensure optimum scanning results:
Hold the Pen at the correct scanning angle.
Place the scanning material on a flat surface.
Ensure scanning material is good quality and pages
are not creased. Note that poorly photocopied
materials may provide bad results.
Do not scan too fast.
Tips
23