Descargar Imprimir esta página

After-Sales Service (Sav) - Decathlon itiwit 1 Manual De Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
Nautical sports can be physically dangerous and demanding. Users of this product should know that this activity carries a risk of getting hurt or
An increase in ambient temperature can cause an increase in the pressure in the kayak's air chambers. After taking your kayak out of the water,
5. Maintenance and Storage
5.1 Maintenance:
Oil, petrol, toluene, petroleum and other solvents are damaging to the kayak's surface.
Rinse the kayak with non-salt water before long-term storage.
It is possible to wash the kayak in warm soapy water.
5.2 Drying:
When drying, or in case of prolonged exposure to the sun, slightly deflate the kayak to avoid excessive stretching of the material and a puncture. A
1- Remove the ailerons: press the plastic pin (I) and slide the aileron outside of its base.
2- Deflate the bottom, the seats and the sponsons by unscrewing the valve body (J). The cap remains attached to the valve stem to not be lost.
3- Remove the bottom of the kayak by removing the 6 Velcro straps 6 (K).
4- Drain the water through the drain plug (L) located at the back of the kayak.
5- For longer durability of the product, dry the kayak.
6- After drying, reposition the bottom in the kayak and attach the 6 Velcro straps. The floor valve is found at the rear of the kayak.
5.3 Folding:
Above all, make sure no sharp objects are located on or inside the kayak.
1- To prepare for folding, position the seats (deflated and folded) inside the kayak, at the level of the bases of the ailerons.
2- Once the kayak deflated, deploy with the bottom facing the floor. Fold the side chambers towards the inside of the kayak (M).
3- Fold the kayak starting on the opposite side of the open valves. The fins' bases must not be folded (N), they must be put flat.
4- The rear tip of the kayak is folded into 2 parts and then folded over the main roll (O).
5- Place the kayak inside its bag and slide the ailerons inside the folds to protect them.
5.4 Storage:
Store the kayak in a dry and protected place between 10°C and 25°C (+50°F and 77°F). In case of long term storage, we recommend occasionally
inflating the kayak for 24 hours to that it does not lose its shape.

5.5 After-sales service (SAV):

The following parts can be ordered in your DECATHLON store or via the Internet: repair kit, right bladder (1.a) left bladder (1.b), bottom bladder (2),
bottom cover (3), 3-valve elements (4), ailerons (5), seats and seat bladders (6), carrying bag (7). The detailed instructions to replace the bladders are
available on the site Decathlon.com.
«BEWARE OF OFFSHORE WINDS AND CURRENTS»
deflate the air from all of the chambers to avoid excessive pressure.
Do not drag the kayak, carry it.
Always make sure that weight is distributed evenly, to prevent the kayak from upending.
Do not exceed load limit indicated on specifications label.
variation of 1°C causes a pressure variation of +/- 0,06 PSI in the bladders.
WARNING!
drowning.
WARNING!
WARNING!
2

Publicidad

loading

Este manual también es adecuado para:

Itiwit 2Itiwit 3