Commissioning And Settings - auna Graceland Mini Jukebox Manual Del Usuario

EN
40

COMMISSIONING AND SETTINGS

Setting the time
Connect the mains adapter to the device and insert the mains plug into the
mains socket. The device is automatically set to standby mode and the time
"00:00" or "12:00" is displayed on the LCD screen.
•
American version: 12 hour system
When the jukebox is put into standby mode, the LCD screen displays
"12:00".
•
European version: 24 hour system
When the Jukebox is put into standby mode, the LCD screen displays
"00:00".
Example: American operation version
To set the time, simply press the "P/R" button on the control panel (20)
or the remote control (6) and hold it down for 3-5 seconds until "12-H"
is displayed on the screen ("12-H" means that the time is set in 12-hour
format). Then press the button
As soon as "12-H" is displayed on the screen, press the "P/R" button again.
The screen will then display "00:00" again with the first "00" flashing. Use
the and buttons on the control panel (3) or the remote control (6) to
select the correct hour setting (keep in mind that the time is set in 12-hour
format) and then press the "P/R" button to confirm. The second "00" now
flashes. Use the and
then press the "P/R" button to save this number.
NOTE: The time is only saved when the jukebox is in operating or standby
mode. If you want to save the set time in the jukebox, simply press the
STANDBY button (8) on the control panel to put the jukebox in standby
mode. If you remove the power supply, the time setting will be erased and
the above procedure must be repeated to set the correct time the next time
the Jukebox is switched on.
The American and European editions of the time setting are identical.
or to select the 12- or 24-hour format.
buttons to select the correct minute setting,