TROUBLESHOOTING
The following checks will help troubleshoot most problems that may occur
with your device. Before going through the following checklist, you should
first check that the power supply unit has been connected correctly. If the
problem persists after the checks listed below, contact the manufacturer,
customer service or an authorised service centre for maintenance and
repair.
Problem
Radio reception
No radio reception
CD playback
CD does not play or
sound skips.
Sound skips
The CD player is not
working.
General
The CD memory list
cannot be played.
Possible cause
The mode selector has
not been set to the
correct position.
The CD was inserted
incorrectly.
The CD is dirty.
The mains plug is not
inserted in the socket.
Solution
Set the desired volume
with the VOLUME
knob.
Rotate the Tuning
knob to search for a
radio station.
Insert the CD into
the CD tray with the
labelled side facing up.
Clean the CD. Restart
the device.
Change the installation
location.
Press the STANDBY
button (restart the
device).
Press the STOP button
and then save the
desired tracks.
Insert the mains plug
correctly into the
socket.
Press the STANDBY
button (restart the
device).
EN
55