EN
46
USB/SD PLAYBACK
1.
Press the MODE button until the LCD display shows "USB or SD". The
display first shows the number of folders and then the number of tracks.
Playback starts automatically.
2. Select the desired song with the
3. Press the REP button once to repeat a song. "REP 1" then flashes in the
upper left corner of the LCD display. If you press the REP button again,
all songs are repeated. "REP A" then flashes in the upper left corner
of the LCD display. Press the REP button again to cancel the repeat
function.
4. For random playback, press the REP button again until "Rand" is
displayed on the bottom of the LCD display. Press the
buttons to select a random song.
5. To create a memory list, first press the STOP button to stop playback.
Press the P/R button to enter the memory mode. The LCD display
flashes and then shows "P01". Select the track you want to save first,
then press P/R again. To stop saving and start playing the saved tracks,
press the button
can store up to 20 tracks. For more information, refer to the section
"PROG (Create Memory List)".
6. Press the MODE button to stop USB or SD playback. Do not disconnect
the mains plug from the socket during USB or SD playback as this may
cause malfunction.
NOTES:
•
If the USB drive contains audio files that are not compatible with the
Jukebox, the Jukebox will not be able to read them. These tracks will
not be included in the total number of tracks displayed and will not
be played.
•
If the SD card contains audio files that are not compatible with the
Jukebox, the Jukebox will not be able to read them. These tracks will
not be included in the total number of tracks displayed and will not
be played.
Note: For optimum performance it is recommended to only use a USB
2.0 flash drive (not a 3.0 version).
or
. The LCD display will show "PROG CD". The device
buttons.
or