APLIC 303576 Manual Del Usuario página 16

All manuals and user guides at all-guides.com
Connect your device to the video grabber using the red and white RCA jacks to
send the audio signal. Note that an RCA audio cable is required here. This is not
included in the delivery.The video can be transferred either through the yellow
composite jack or the black S-Video connector. Also note that an S-video cable
or a composite cable is necessary to connect the grabber to the device. Even this
cable is not included in the delivery.
RCA jacks
Note: If your external playback device comes with a Scart port, it is possible to con-
nect the grabber to the playback device using a separately available Scart adapt-
er. Connect the playback device using a separate RCA audio cable and a separate
S-video or composite cable to the Scart adapter. Then plug it into the Scart Out port
of the playback device. Ensure that the adapter is set to "Out".
2. Connect the grabber to your computer using the USB cable.
Note: If the Grabber is connected to a front USB port and does not work as expect-
ed, we recommend to use one of the rear USB ports directly on the motherboard,
since these USB ports provide a more stable power supply.
16
English