Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
7. Troubleshooting
No video signals are be-
ing transmitted
No audio signals are be-
ing transmitted
The quality of the re-
corded video files is poor
8. Safety instructions and disclaimer
Never try to repair or modify the device by yourself. Avoid contact with the mains
supply. The device is free of electrical current only when disconnected. The device
is not approved for outdoor use. Therefore, please use it only in dry surroundings.
Protect it from high humidity, water and snow. Do not expose the device to high
temperatures.
Do not expose the device to sudden changes in temperature or strong vibrations,
as this could damage the electronic components. Check the device for any
damage before using it. The device should not be used if it has been subject to
impact or has been damaged in any other way. Please follow the local regulations
and restrictions.
24
Please check the cable connection and whether the
correct signal input was selected in the software.
Also check whether the graphics card driver of your
computer is up to date.
Please check the cable connection. Then check
whether the correct signal input was selected in
the digitalisation software.
The quality of the recorded videos is mainly de-
pendent on the original material used. The prop-
erties of the cable connection and the input signal
used also play an important role. Use the shortest
possible high-quality connection cables to avoid re-
duction of quality during the analogue signal trans-
mission. If your playback device has an S-Video out-
put, then it must be connected to the S-Video input
of the video grabber. The signal quality of S-Video is
better than that of Composite (Cinch).
English
Publicidad
