Interchangeable Lens Calibration to enter again.
Select Interchangeable Lens Calibration, and follow
3.
the prompts to continue.
Hold the camera and aim it at the target plate (as
1).
shown in
target plate should meet the following requirement.
Press OK.
2).
The camera emits a beam of red laser.
Slightly adjust the camera position to aim the red
3).
laser dot at the "TARGET" character on the plate
and keep still for measuring the distance.
Note:
● If the measurement succeeds, the distance is
displayed on the screen. If it fails, adjust the
distance and try again.
● It is recommended to use a tripod to fix the
camera if keeping it still is difficult.
Use the left/right buttons or the focus ring to adjust
4).
the focus, and press OK after the "TARGET" is clear
(as shown in
Adjust the target's optical image with navigation
5).
buttons until it overlaps with the thermal image,
and press OK (the well-overlapped image as shown
in
⑤).
© 2021 Hangzhou Microimage Software Co., Ltd. All
rights reserved.
About this Manual
The Manual includes instructions for using and managing
the Product. Pictures, charts, images and all other
information hereinafter are for description and
explanation only. The information contained in the
Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest
version of this Manual at the HIKMICRO website
(www.hikmicrotech.com/).
Please use this Manual with the guidance and assistance
of professionals trained in supporting the Product.
Trademarks Acknowledgement
). The distance between the camera and
②
Lens Model
HM-G605-LENS
HM-G620-LENS
HM-G630-LENS 3.0 m – 4.0 m
④).
Distance
0.5 m - 1.5 m
1.5 m - 2.5 m
5
③