Inappropriate Use; User Qualification; Design; Connections - GOK Caramatic DriveOne Instrucciones Para El Montaje Y El Funcionamiento

INAPPROPRIATE USE

All uses exceeding the concept of intended use:
• e.g. operation using different media, pressures
• use of gases in the liquid phase
• installation against the flow direction
• changes to the product or parts of the product
• use at ambient temperature varying from: see TECHNICAL DATA
• operate indoors
• installation in mobile homes and sports boats
• assembly without specialists, see USER QUALIFICATION!
• installation differs from installation position (see page 12)
• operation of devices while driving which have not been approved for this by the
manufacturer
• operation of cooking devices or ovens while driving

USER QUALIFICATION

ASSEMBLY, MAINTENANCE
SHUT-DOWN, REPLACEMENT, RESTART, RESTORATION,
START-UP, OPERATION, DISPOSAL, TROUBLESHOOTING
Leak check
*Experts are particularly those who, on the basis of their training, knowledge and experience
gained during practical activity, guarantee that they carry out the inspection properly.

DESIGN

Inlet connector
Outlet connector
Green push button on the
crash-sensor-pendulum

CONNECTIONS

Connections could become leaky, if they are contaminated or corrupted
Therefore, the connections must regularly be checked for leak-tightness.
Swap the product where appropriate.
Keep all connections free from contamination, even small amounts of dirt can cause
connections to leak.
Gaskets in the connections must not be damaged and be placed correctly in the frame.
Artikel-Nr. 71 813 50 a
Activity
qualified personnel,
customer service
user and operator
expert*
Breather of S2SR
Test connection
Low pressure regulator 90°or (inclined) 105°
Connection for Eis-Ex regulator heating
Caramatic DriveOne
Qualification
13 / 74