Technics SB-LV500 Manual Del Usuario página 29

B
Installation on a wall
SB-LV500 SB-S500
Fit the front and surround speakers following the method below.
The illustration above shows how to fit the surround speakers. The
same method also applies to the front speakers.
Note
Ensure the wall is strong enough to support the speakers. There is
a danger of speakers falling if it isn't. Consult with your Technics
dealer before installation.
1
Attach the metal wall mount (included).
2
Attach the speaker feet (included).
Attach two to the lower part of the rear of the speaker.
3
Install the speakers on the wall.
Screw the wood screw (not included) into a thick, hard part of
the wall.
Attaching the speaker feet
SB-LV500 SB-C500 SB-S500
Attach four speaker feet to the base of each speaker that is to be
put directly on the floor or a shelf.
The above illustration shows an example using the center speaker.
The method is the same for the other speakers.
Note
To prevent damage to the speakers, lay them on top of a soft
●
cloth before attaching the speaker feet.
The front speakers are extremely slim, so take care they do not
●
topple.
ÇÌËχÌËÂ
ç Ô˚Ú‡ÈÚÂÒ¸ ÔpÓËÁ‚ÂÒÚË Ì‡ÒÚÂÌÌÛ˛ ÛÒÚ‡ÌÓ‚ÍÛ ‰Ë̇ÏËÍÓ‚
͇ÍËÏÎË·Ó ËÌ˚Ï ÒÔÓÒÓ·ÓÏ, ÍpÓÏ ÓÔËÒ‡ÌÌÓ„Ó ‚ ‰‡ÌÌÓÈ
ËÌÒÚpÛ͈ËË.
A
B
Installation on a wall
SB-LV500 SB-S500
Fit the front and surround speakers following the method below.
The illustration above shows how to fit the surround speakers. The
same method also applies to the front speakers.
Note
Ensure the wall is strong enough to support the speakers. There is
a danger of speakers falling if it isn't. Consult with your Technics
dealer before installation.
1
Attach the metal wall mount (included).
2
Attach the speaker feet (included).
Attach two to the lower part of the rear of the speaker.
3
Install the speakers on the wall.
Screw the wood screw (not included) into a thick, hard part of
the wall.
Attaching the speaker feet
SB-LV500 SB-C500 SB-S500
Attach four speaker feet to the base of each speaker that is to be
put directly on the floor or a shelf.
The above illustration shows an example using the center speaker.
The method is the same for the other speakers.
Note
To prevent damage to the speakers, lay them on top of a soft
●
cloth before attaching the speaker feet.
The front speakers are extremely slim, so take care they do not
●
topple.
A
B
29