Troubleshooting Guide - Haier HLP22P Manual De Uso

English

Troubleshooting Guide

Before calling for service, determine the symptoms and follow the suggested
solutions:
Washer does not operate:
• Check if unit is plugged in. The plug may have come loose.
• Check if the electrical wall receptacle is of proper voltage.
• Check if the circuit breaker needs to be reset or if the fuse needs to be replaced.
• Check if the washer is overloaded. The load may need to be re-balanced and
clothing may need to be redistributed.
• Check if the door is open. You may have to close the door properly.
• The washer pauses during some cycles. This is normal during the "Synthetic"
cycle, which have short soak periods for. You will not hear the washer operate for
a short period of time. When the soak time is over, it will start
automatically.
• Check if the program/option selections are set properly. You may have to adjust
the settings.
• Check if you have selected the "Delay Start" option. You may have to turn that
option OFF and reselect.
• Check the Power "ON/OFF" button to see if it is in the OFF position. You may
have to press the button to set it in the ON position.
• Check if the "Start/Pause" button is on "Pause" mode. Press this button to start the
wash process.
• The wash process is paused. This is normal. The clothing sensor is checking to
verify that there are clothes inside the washtub. Water will be added
approximately 48 seconds later.
• The pulsator pauses during incoming water flow in the wash and rinse cycle. This
is normal. This prevents splashing during the water inlet.
23
All manuals and user guides at all-guides.com