Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
(5) Pull-open the body main frame (Part A) and put the safety pin (Part G) at the first hole - this
(6) Pull down the pedals. At the back of the pedal insert the cable, put the screw and the nut (packed with
hole will be the only visible-, in order to secure the position. See picture.
the manual), then tight it with #5 Allen Wrench (Part H) and wrench (Part I) then hook the end of the
band at the back rear at the resistance level of your choice. See picture.
First Hole
First Hole
Second Hole
www.maxiclimber.com
EN7
Publicidad
Tabla de contenido
