Replace The Base Grille; Start The Icemaker - GE 22 Manual Del Propietario E Instalación

INSTALLING THE REFRIGERATOR

REPLACE THE BASE GRILLE

7
Replace the grille by installing the two Phillips
head screws.
SET THE CONTROLS
8
Set the controls to the recommended setting.
Installation Instructions
24
(CONT.)

START THE ICEMAKER

9
Set the icemaker power switch to the I (on)
position. The icemaker will not begin to operate
until it reaches its operating temperature of
15°F (–9°C) or below. It will then begin operation
automatically. It will take 2–3 days to fill
the ice bin.
Power
switch
NOTE:
In lower water pressure conditions, the water
valve may turn on up to 3 times to deliver
enough water to the icemaker.