Waste Electrical And Electronic Equipment; Ec Declaration Of Conformity - Rothenberger Industrial FL-98 Instrucciones De Operación

- Ensure that the parts cannot move until the solder has set.
- Flux residue should be removed from the joint after cooling, except when using
multicore solder. The resin residue produced when using multicore solder should
not be removed.
Note Soldering takes practice. Familiarise yourself with the procedure and make
trial runs on waste material before starting work. Seek training or assistance from
an expert if required.
De-soldering
The machine can be used for de-soldering in combination with a de-soldering pump
or de-soldering braid.
- Heat the joint and soak up the solder using de-soldering braid or de-soldering
pump.
MAINTENANCE
MAINTENANCE
The machine requires very little maintenance but should be kept clean and free of
dust. Do not use aggressive cleaning agents to clean the plastic parts of the
machine.
The tips should be cleaned regularly according to the instructions in this manual.
Repairs and the fitting of replacement mains cables may only be carried out by
the manufacturer or a qualified electrician.

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT

Waste electrical and electronic equipment must be recycled and
may not be disposed of with household waste. Contact your local
authority for details of recycling facilities.

EC Declaration of Conformity

We, WALTER WERKZEUGE SALZBURG GmbH, Gewerbeparkstraße 9,
5081 Anif, Austria
declare that the design and construction of the following machine, in the form supplied by
us, comply with the requirements of the appropriate EC directives.
Product description:
Model:
Appropriate EC directives:
Applicable harmonised
norms:
Ben Shields
Head of Product Management
and person responsible for
technical documentation
Soldering gun set
FL-98
EC – Low voltage directive 2006/95/EC
EC – Directive on electromagnetic compatibility (EMC)
2004/108/EEC
ROHS
EN 60335-1:2002+A11+A1+A12+A2+A13:2008;
EN 60335-2-45:2002+A1:2008; EN 62233:2008
Anif, 01.08.2012
11
Alexander Reischl
Product Manager