FEATURES
1. Tip
2. Tip holders
3. Tip holder screws
4. Trigger
5. Spotlight
6. Cable
7. Tip
SCOPE OF USE
The machine is designed for soldering electrical wires and circuit boards, repairing
small electronic appliances, de-soldering, tinning wire and model making. The
machine is for indoor use only and may not be used outdoors. The machine may
not be used for any other purpose.
CONNECTING TO THE MAINS
The unit may only be connected to a single-phase mains outlet with as the same
voltage as given on the machine's rating plate. 230 V machines can also be
connected to 220 V mains outlets. The mains circuit must be equipped with a 16
Amp fuse.
FITTING / CHANGING TIPS
Caution! Soldering tips become extremely hot. Ensure that the tip and the tip holders
have cooled down completely before attempting to change the tip.
- Loosen the tip holder screws and
remove the tip.
- Insert the new tip and re-tighten the
tip holder screws.
2
1
3
5
7
6
9
4