Symbols Used In This Manual - Rothenberger Industrial FL-98 Instrucciones De Operación

SYMBOLS USED IN THIS MANUAL

= Wear eye
protection
Safety instructions for the
soldering gun
- The metal parts of the machine become
extremely hot during operation. Never touch the metal parts and hold the
machine only by the handle.
- Ensure that the tip is securely fastened in the tip holders before starting
work. Check that the tip holder screws are tight.
- Plan your work carefully and prepare a safe place to put the machine down
after work. Never place the machine on an inflammable surface.
- The tip must be allowed to cool down to room temperature after finishing
work. Never cool the tip by immersing it in water - danger of electric
shock!
- Do not store the machine or leave the machine unattended until it has
cooled down completely.
- Use the machine only in well-ventilated rooms. Toxic fumes can be
produced when using the machine which can damage your health. Use a
fan or ventilator if required. Seek expert advice if necessary.
- Many types of solder consist largely of lead, which is poisonous. Do not
eat, smoke or drink while using the machine. Always wash your hands
thoroughly after finishing work.
- To avoid the risk of overheating the soldering gun may only be heated for
12 seconds max. The soldering gun must then be allowed to cool for 48
seconds.
- The cable is not heat-resistant. Always lead the cable away towards the
rear of the machine and ensure that the hot soldering tip does not come
into contact with the cable. Damaged cables may only be replaced by the
manufacturer or a qualified electrician.
- Store the machine out of the reach of children, do not allow children to use
the machine and keep children out of the area when using the machine.
- Be aware that toxic fumes may be produced when using the cutting tip to
cut plastic, especially PVC. Do not inhale the fumes. Work only in well
ventilated rooms.
BEFORE USING THE MACHINE
TECHNICAL SPECIFICATIONS FOR FL-98
Rated voltage
Rated power
ON
OFF
Lamp
Weight
Protection category II
= Wear protective
gloves
230 V ~ / 50 Hz
100 W
30 seconds
30 seconds
2,2V / 0,5W
1 kg approx.
8
= Read the
operating Manual