Troubleshooting - NewAir NBC096BS00 Manual Del Propietário

TROUBLESHOOTING

Problem
Unite does not
operate.
Unit is not cold
enough.
The light does not
work.
The unit vibrates while
operating.
The unit produces a lot
of noise.
www.newair.com
Possible Causes
The unit may be
plugged in using a
different voltage.
The circuit breaker may
be tripped or there is a
blown fuse.
The external
environment may
require a higher
setting.
The door may be
opened too frequently.
The door is not closed
completely.
The door seal does not
seal properly.
The front grille is
obstructed.
There may be a
problem with the
display board.
The unit is not sitting
on a level floor, or the
unit's feet are not
correctly installed.
The unit is not levelled.
The fan may be
obstructed
Solution
Check if using the
wrong voltage.
Reset the circuit
breaker or check for a
broken fuse
Lower the temperature
of the cooler.
Open the door less
frequently.
Make sure the door is
closed securely.
Replace the seal on the
door. Replacements
can be acquired from
the manufacturer.
Make sure nothing is
blocking the front
grille.
Contact the
manufacturer.
Make sure the unit's
feet are in the proper
position and tightened
securely.
See above.
Check the fan to make
sure there is no debris
or obstruction. If not,
contact the
manufacturer.
EN
13