Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is
switched off or when it is running but not actually doing the job. This may significantly reduce the exposure
level over the total working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce the
harmful effect of vibrations.
Dust from material such as paint containing lead, some wood species, minerals and metal may be harm-
ful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the
operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction
with additives for wood conditioning (chromate, wood preservative). Material containing asbestos must
only be treated by specialists.
▪
Where the use of a dust extraction device is possible it shall be used.
▪
To achieve a high level of dust collection, use vacuum cleaner for wood or for wood and/or minerals
together with this tool.
▪
The work place must be well ventilated.
▪
The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work with.
III - General power tool
safety warnings
WARNING! Read all safety warn-
ings and all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
1. WORK AREA sAfEty
a) Keep work area clean and well lit. Clut-
tered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
2. ElECtRICAl sAfEty
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
4
EN
All manuals and user guides at all-guides.com
3. PERsONAl sAfEty
any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f) If operating a power tool in a damp loca-
tion is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
a) stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment
bPR 15li
Publicidad
Capítulos
Tabla de contenido
