Publicidad
Idiomas disponibles
Idiomas disponibles
ESPAÑOL
SPECIFICATIONS
Power supply
Resistive load
Inductive load
Time adjustment
Degree of protection
Operating temperature
DESCRIPTION
• This time switch is for application in an electrical switch box to turn off a particular circuit
with a countdown period from 30 seconds to 10 minutes. It can also works as a normal
on/off switch.
• The countdown time switch allows connection with many switches (both or without neon
switch) in different locations for more convenience control.
DIAGRAMAS DE CABLEADO
MOUNTING AND CONNECTING
• Designed for easy installation in the electrical switch box, simply hook the timer onto the
railing and press until you hear "click". To remove, pull down the catch located at the
bottom of the timer to release.
• The installation procedure for the timer is as follows:
- Connect the wires as shown in Diagram 1 for 3-wire connection and according to
Diagram 2 for 4-wire connection.
- For countdown functions, turn the time knob to the desired countdown period (from
30 seconds to 10 minutes).
- Then, put the switch to
function.
- Push the neon switch to activate the countdown function, power turns on. It will be off
automatically according to preset time.
- Total current for the neon should not exceed 100mA. If a neon carries 1mA current,
then, should not connect more than 100 neon switch to the countdown time switch.
• To override the countdown period, turn the switch to
the switch to
Diagram 1
Wiring diagram
3-wire connection
position. The time switch is in standby mode for countdown
position to turns off power.
Electronic staircase timer
230V~, 50Hz
16A, Max. 2300W / 1000VA
230V~, 4A / cos Φ 0.4
30 seconds to 10 minutes
IP20
-10ºC ~ 55ºC
Wiring diagram
4-wire connection
position, power turns on. Then turn
ENG
Diagram 2
Publicidad
