Turning On And Off Hearing Instruments; Switching To Standby Mode - signia Styletto X Manual Del Usuario

Low power indication of the hearing instruments
You will hear an alert signal to indicate the power cell is running
low. The signal will be repeated every 20 minutes. Depending on
the usage of your hearing instruments, you have approximately
1.5 hours to charge your hearing instruments before they stop
working.
Turning on and off hearing instruments
You have the following options to turn your hearing instruments on
or off.
Turning on: Take the instruments out of the charger.
X
The startup melody is played in your hearing instruments. The
default volume and hearing program are set.
Turning off: Place the hearing instruments in the charger.
X
Note that the charger must be on.
24
Switching to standby mode
Via remote control, you can switch your hearing instruments to
standby mode. This mutes the hearing instruments. When you leave
standby mode, the previously used volume and hearing program
are set.
Note:
●
In standby mode, the hearing instruments are not turned off
completely. They draw some power.
Therefore we recommend to use standby mode only for a short
period of time.
●
If you want to leave standby mode, but the remote control is
not at hand: Turn your hearing instruments off and on again
(by shortly placing them in the charger until one or more LEDs
light up). Wait until the startup melody is played in your hearing
instruments. This may take several seconds. Note that the
default volume and hearing program are set.
25