Midea MLH45N1AWW Manual Del Propietario & Instrucciones De Instalación página 33

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
Possible Cause
Door unlocks
This is normal
or press
and machine
doesn't
operate
Incorrect operation
Water does
Automatic self system
not enter
checks
washer or
enters slowly
Water supply is turned off • Turn on water supply.
Water valve screens are
stopped up
Wrinkling
Improper sorting
Overloading
Incorrect wash cycle
Repeated washing in
water that is too hot
What To Do
• Front-load washers start
up differently than top-
load washers, and it takes
30 seconds to check the
system. The door will lock
and unlock.
• Simply open and close
the door firmly; then
press
.
• After
is pressed,the
washer does several
system checks.
Water will flow 60 seconds
after
is pressed.
• Turn off the water source
and remove the water
connection hoses from
the upper back of the
washer. Use a brush or
toothpick to clean the
screens in the machine.
Reconnect the hose and
turn the water back on.
• Avoid mixing heavy items
(like work clothes) with
light items (like blouses).
• Load your washer so
clothes have enough
room to move freely.
• Match cycle selection to
the type of fabric you are
washing (especially for
easy care loads).
• Wash in warm or cold
water.
33

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido