Modification And Misuse; Essential Requirements; During Use - Nouvag HighSurg 30 Instrucciones De Uso

3.3

Modification and misuse

If modifications are made by the user/operator or a third party to the HighSurg 30 and the accessory
equipment provided, or if these items are used by these individuals for a purpose other than that for
which the items were designed (according to chapter 1.1 Intended use and operation), the manufacturer
assumes no responsibility and the guarantee is void.
3.4

Essential requirements

The HighSurg 30 may only be operated by
qualified and trained personnel.
The use of third-party products is the
responsibility of the operator.
Functionality and patient safety cannot be
guaranteed with third-party accessories.
Repairs may only be performed by
authorized NOUVAG service technicians.
Improper use or repair of the device and
failure to observe these instructions
relieve us from any obligation arising from
warranty provisions or other claims.
3.5

During use

The device is not sterile on delivery. All
sterilizable parts must be sterilized before
use (see Chapter 8 Cleaning, disinfection
and sterilization).
Handpieces and contra angles may only
be attached when the electronic motor is
not running.
To prevent injury, never touch drill bits or
burrs while they are still running.
The user must ensure that as little friction heat as possible is generated during a procedure on a patient.
High speeds and high application pressure may cause thermal necrosis of tissue.
4
All manuals and user guides at all-guides.com
Repairs may only be performed by authorized
NOUVAG service technicians.
Prior to using the device, before startup, and before
operation, the user must always ensure that the
device and accessories are in good working order
and are clean, sterile and operational.
Use Nou-Clean spray for maintenance and care of
the motor, handpieces and contra angles. Using
other care products can result in malfunctions
and/or cause the warranty to be revoked.
At the choosing of the instrument the operator has
to make sure it's biocompatible, according to
EN ISO 10993.
Never operate the clamping mechanism of the
handpieces or contra angles while the system is
running. This could result in instrument damage.
Do not use device in the vicinity of flammable
mixtures!
HighSurg 30 Operating Instructions, Ref. 31666, V24/16
HighSurg 30