Human Touch HT 125 Manual Del Usuario página 7

customise massage
The massage-softening pad softens the massage intensity.
For a stronger massage, remove the massage-softening pad.
1. Flip the head pillow over to the back of the chair.
2. Detach the top of the backrest pad hook and loop strip from the chair.
3. Open the horizontal zip on the back of the backrest pad.
4. Insert or remove the massage-softening pad as desired.
5. Close the zip.
6. Attach the top of the backrest pad to the chair using the hook and loop fasteners.
7. Flip the head pillow over to the front of the chair.
Replacement Replacement massage-softening pads are available from Replacement massage-softening pads are available from Human Touch, for an additional charge.
humantouch.com
All manuals and user guides at all-guides.com
intensity
To experience the full power of
Human Touch just remove the
massage-softening pad from
your chair. But keep it handy,
in case you want to replace it
in the future.
13
care and maintenance
To keep your product working and looking its best, please follow
these simple care guidelines.
Cleaning:
1. Be sure to unplug before cleaning.
2. Do not use benzene, thinner or any other solvents on your massage chair.
3. Remove dust on the backrest or armrest with a vacuum cleaner.
4. If the backrest or armrests become dirty, wipe with a damp cloth, then a dry cloth.
5. Common upholstery cleaners may be used for tough stains.
6. When cleaning the remote control or around the power switch, use a dry cloth only. Never use a damp cloth to clean
the controller or power switch.
Fabric Care:
To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum
extension. SofSuede ™ products can also be brushed with a suede brush. Wipe with a slightly damp cloth as necessary. For
tougher stains on non-leather products, use a mild detergent mixed with water. Leather products should be wiped down
occasionally with a leather furniture cleaning solution.
WARNING:
Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the colour does not fade
prior to using the solution on the entire product surface.
Maintenance and Repair:
1. The mechanisms of this product are specially designed and constructed to be maintenance free.
2. Your chair should only be serviced by an authorised service centre.
Storage:
1. When not in use for a long period of time, we recommend that the chair be covered, the power lead be coiled
and that the unit be placed in an environment free of dust and moisture.
2. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods of time.
This may cause fading or damage.
Miscellaneous:
1. Foreign objects should not be inserted between the massage nodes or the unit housing.
2. Care should be taken not to overload the unit.
WARNING:
This product is equipped with a thermal resetting protection device. This is an added safety feature
to protect you and this product from overheating. If the product should suddenly stop and will not start, turn the
main power switch, located on the back of the product, to off and do not operate the product for at least 30 minutes.
Failure to turn the product off may result in the product starting unexpectedly when the product cools.
14