Getting Started - Vaporti PRO II Manual Del Usuario

GET TING STARTED
1. Turn the tank upside-down and unscrew the steel cap (see page 4).
2. Point and pour e-liquid into the sides of the tank. Fill to the edge of the center tube of the
tank. (DO NOT OVER-FILL OR POUR E-LIQUID INSIDE OF THE CENTER TUBE)
3. Screw the steel cap back onto the tank.
4. Screw the tank onto the battery. Do not over tighten parts, but ensure that all parts are
securely assembled.
5. To saturate the cotton coil with e-liquid, wait 1 to 2 minutes before vaping, then take a few
"dry puffs" without pressing the battery power button. This will avoid a "dry hit."
6. Quickly press down and release on the battery's power button 5 times within 2 seconds
to turn on your battery.
7. To use, press down and hold the power button while you take a puff. Release the button
when you have finished puffing and enjoy!
03