Vaporti PRO II Manual Del Usuario página 6

REFILLING E-LIQUID
When you have about 25% of e-liquid remaining or you experience a
slightly burnt taste, you will need to refill your tank with e-liquid.
1. Always remove the battery from the tank before refilling
with e-liquid. When unscrewing your tank from your battery,
always turn your device sideways, hold the steel cap located on
the tank and unscrew the battery counterclockwise.
2. Turn the tank upside-down and unscrew the steel cap.
3. Point and pour e-liquid into the sides of the tank. Fill to about 75%
capacity of the tank. (DO NOT OVER-FILL OR POUR E-LIQUID
INSIDE OF THE CENTER TUBE)
4. Screw the steel cap back onto the tank.
*VaporFi Pro-L II tanks contain O-rings that maintain an air-tight seal in order to
prevent leaking from the tank. Avoid over tightening of the tank's steel base or
atomizer head as this could damage the O-rings and cause leaking. Therefore, when
screwing on your atomizer head or steel base, only tighten until you feel resistance.