Vaporti PRO II Manual Del Usuario página 8

4. Once the old atomizer has been removed, screw in a new atomizer head by turning it clockwise
into the steel base until you feel resistance. Make sure not to over tighten the atomizer head as
this may damage the rubber O-rings and cause leakage.
5. Screw the steel base back onto your tank by turning it clockwise. Make sure not to over tighten.
6. Prime your atomizer by taking a few "dry puffs" without pressing the power button in order to
saturate the cotton within the coil, then let the device sit for 5 minutes to allow the e-liquid to
saturate the cotton ensuring a flavorful first pull and avoid a dry hit.