Fading In And Out (Fader); Dubbing A Tape - Sony TC-WE825S Manual De Instrucciones

Fading In and Out (Fader)

You can gradually increase the recording level at the
beginning of a recording (fade in) or gradually
decrease the recording level at the end of a recording
(fade out).
It is convenient to use this function, for example, when
the tape reaches to its end and you don't want the track
to be cut off abruptly.
RESET MEMORY A COUNTER
g
DIRECTION MODE
RMS
A a
RELAY
RMS/START SET CHECK DISPLAY
– RMS +
0 (AMS) (AMS) )
Ø ON ø OFF
ª ·
p
PITCH CONTROL
CLEAR BACK FRONT
DOLBY NR
PAUSE REC MUTE REC OFF ON ON FILTER
P R r
– +
§
To Do the following:
Fade in 1 Follow Steps 1 to 4 of "Recording on a
Tape" on page 6.
2 Press FADER. During fade-in, the
AUTO indicator flashes. When the
fade-in has completed, the AUTO
indicator lights up if the Auto Rec
Level function is working, or goes off if
the Auto Rec Level function is not
working.
Fade out Press FADER when you want to start
fading out while recording. When the
fade-out has completed, "REC" flashes
in the display and the deck pauses.
Note
Fade-in or fade-out is not possible when you have used REC
LEVEL to manually set the recording level to 0 (minimum)
(see page 7).
AUTO indicator FADER
B RESET MEMORY
AUTO REC LEVEL
5
4 6
3 7
2 8
1 9
AUTO CAL(STARTP) DUBBING A B
0 10
DECK A DECK B A+B REC HIGH/NORMAL
START(DECK BP)
FADER ARL
0 (AMS) (AMS) )
π SYNCHRO
ª ·
p
B C S PAUSE REC MUTE REC PHONES
P R r
§
Advanced Recording Operations

Dubbing a Tape

You can copy a tape in deck A to a tape in deck B at
normal or high speed.
DIRECTION MODE ª / ·
RESET MEMORY A COUNTER
g
DIRECTION MODE
RMS
A a
RELAY
RMS/START SET CHECK DISPLAY DECK A
– RMS +
0 (AMS) (AMS) )
Ø ON ø OFF
p ª ·
PITCH CONTROL CLEAR BACK FRONT
DOLBY NR
PAUSE REC MUTE REC OFF ON ON FILTER
P R r
– +
§
p PAUSE P
1
Insert the recorded cassette into deck A and a
blank cassette into deck B.
Make sure the record-protect tabs on the cassette
in deck B have not been removed.
2
Select the side(s) to be recorded on.
To record on Set DIRECTION MODE to
A
One side
Both sides a.
Recording on the reverse side on
deck B starts independently of
playback on deck A.
RELAY.
Recording on the reverse side on
deck B starts simultaneously with
playback of the reverse side on
deck A.
3
Select the dubbing speed.
To select
Normal speed
High speed
"HIGH" or "NORM" appears in the display.
The tape deck changes to dubbing standby.
4
Select the side from which to start dubbing.
To record from
The front side
The reverse side
5
Press PAUSE P on deck B to start dubbing.
HIGH / NORMAL
B RESET MEMORY
AUTO REC LEVEL
5
4 6
3 7
8
2
1 9
AUTO CAL(STARTP) DUBBING A B
0 10
DECK B A+B REC HIGH/NORMAL
START(DECK BP)
FADER ARL
0 (AMS) (AMS) )
π SYNCHRO
p ª ·
B C S PAUSE REC MUTE REC PHONES
P R r
§
Press HIGH/NORMAL
Once
Twice
Press
·
ª
(Continued)
EN
13