LEXIBOOK Barbie SM85BB Manual De Instrucciones página 4

during 5 seconds after each sampling time (15 seconds).
The temperature measurement range is -50∞C to 70∞C ( -58∞F ~ 158
n
∞F) and the humidity measurement range is (20% ~ 90% R.H.).
HIGH TEMPERATURE/HUMIDITY ALARM SETTING MODE
1. Press 4 times on the Mode key to enter High Temperature/Humidity
Alarm Mode (indicated by the and icons on right side of the
screen).
2. Press and hold the Set o C/ o F key to enter High Temperature/Humidity
Alarm setting mode: the icon will blink.
3. Press Adj. max/min key to toggle the high temperature alarm on
( icon blinking) or off (no icon).
4. Press Set o C/ o F key to confirm: the high temperature in degrees will
blink.
5. Press Adj. max/min key to set the high temperature value (only if the
high temperature alarm is on).
6. Press Set o C/ o F key to confirm: the high humidity icon
7. Press Adj. max/min key to toggle the high humidity alarm on (
blinking) or off (no icon).
8. Press Set o C/ o F key to confirm: le high humidity level in % will blink.
9. Press Adj. max/min key to set the high humidity value (only if the high
humidity alarm is on).
10. Press Set o C/ o F key to confirm all your settings.
Notes:
If the high temperature and humidity alarm have been activated the icon
n
will be displayed in the time mode.
If temperature/humidity is higher than the set value, an alert will beep
n
during 5 seconds after each sampling time.
STOPPING THE TEMPERATURE OR HUMIDITY ALARM
To momentarily stop the activated alarm, press on SNOOZE.
To stop the alarm definitely, you must turn the
temperature/humidity alarm off by following the procedure stated
in the low temperature/humidity alarm setting mode or the high
temperature/humidity alarm setting mode.
Note: if the temperature or humidity alarm goes on and no key is pressed, it
will continue to beep as long as the temperature/humidity remains within the
set alert range.
5
All manuals and user guides at all-guides.com
will blink.
icon
Copyright © Lexibook 2005
INDOOR / OUTDOOR TEMPERATURE MODE
Your unit indicates the temperature inside or outside. To change the
display:
1. Press 5 times on the Mode key to enter indoor / outdoor temperature
mode.
2. Press Adj. max/min key to choose between the display of the indoor or
the outdoor temperature on the LCD screen (the corresponding
icon will blink).
3. Press Mode key to confirm and go back to time mode display screen.
TEMPERATURE AND HUMIDITY HISTORY
To view the minimum and maximum temperature and humidity
history, press Adj. max/min in Normal Time display mode.
Pressing Adj. max/min once will display the maximum values
recorded for the temperature and humidity. Press Adj. max/min
twice to view the minimum values recorded for the temperature and
humidity. Press Adj. max/min a third time to return to the normal time
display mode.
Note: the unit starts recording the temperature and humidity values during
your first utilisation. Those records can only be deleted if you reset the unit
(see the getting started section).
CURRENT WEATHER INDICATORS
The SUNNY , CLOUDLY and RAINY icons indicate the most likely current
weather condition. When it's sunny, Barbie wears her sunglasses; when it's
cloudy, she still wears sunglasses but a cloud will appear; when it rains,
Barbie holds an umbrella.
Important note: Lexibook does not pretend in any way to accurately predict
the weather forecast.
6
or
Copyright © Lexibook 2005