Changing Presser Foot; To Remove; To Attach; Presser Foot Types - Sears Kenmore 385.15202 Manual De Instrucciones

Changing Presser Foot
(_Lever
(_)Groove
(_Pin
, To remove
Turn the handwheel toward you to raise the needle to its
highest position, Raise the presser foot.,
Press the leverOon the back of the foot holder.. The
presser foot will drop off_
• To attach
Place the presser foot so that the pin _on the foot lines
up directly below the groove(_)of the foot holder.
Lower the foot holder to lock the foot in place,
Presser Foot Types
o Zigzag foot
Use this foot for both straight and zigzag stitching°
For:Straight stitch
Topstitching
Basic zigzag
Satin stitching
Monogramming
Applique
Bar tacking
Button sewing
Overcasting stitch
* Multiple zigzag stitch
* Blind hem stitch
* Lace work
*Shelt stitch
* Decorative stitch patterns
Twin needle stitch
(*Model 15208 exclusive)
(page 32)
(page 34)
(page 40)
(page 40)
(page 42)
(page 42)
(page 44)
(page 44)
(page 46)
(page 46)
(page 48)
(page 48)
(page 50)
(page 50)
(page 52)
° Sliding buttonhole foot
Use this foot for manual buttonhole making, it is marked
to help you measure a buttonhole accurately,
For: Buttonhole sewing (page 54)
, Zipper foot (Model 15208 exclusive)
The edge of the foot guides the zipper and keeps the
seam straight,
For:Zipper sewing (page 34)
f
.................................. J
J
%
° Straight stitch foot (Model 15208 exclusive)
Use this foot exclusively for straight stitching with the
center needle position.
For: Straight stitch (page 32)
Topstitching (page 34)
.J
....................... J
12