Inserting Bobbin - Sears Kenmore 385.15202 Manual De Instrucciones

* Inserting bobbin
[] Place a bobbin in the bobbin case, making sure the
thread feeds clockwise from the bobbin.
[] Draw the thread through the slot of the case.
[_ Continue to draw the thread under the tension spring (_
and through the opening,
Pull out about 4" (10 cm) of thread_
(_ Tension spring
[_ Holding the latch open, position the bobbin case into the
shuttle, and then release the latch.
[] The case should lock into the place when the latch is
released.
[]
[]
',,,. ....
[]
[]
J
J
22