SilverCrest SDA 260 A1
service (see "Warranty information" on page 71).
Only connect the dehydrator to a properly installed,
easily accessible wall outlet whose mains voltage
corresponds to that on the rating plate. After connecting
the appliance, the wall outlet must still be easily
accessible so that you can remove the mains plug quickly
in the event of an emergency.
Never immerse the base unit (4), the power cable (3) or
the mains plug in water or other liquids. If liquid does
penetrate the base unit (4), disconnect the mains plug
from the wall outlet immediately and contact customer
service (see "Warranty Information" on page 71).
Risk of fire!
Do not place the dehydrator on painted surfaces or on
textiles such as a tablecloth.
Never place the dehydrator under or directly next to
flammable items such as curtains or drapes.
Maintain a clearance of at least 50 cm around the
appliance to flammable and combustible materials.
Ensure that there is unimpeded air circulation. Leave
sufficient space around the dehydrator and at least 1m
clearance above the device.
Never block the ventilation holes on the underside of the
base unit or cover these with cloth. This can cause the
dehydrator to overheat and cause a fire.
58 - English