Important Safeguards - Honeywell HMW-500 Serie Instrucciones Para La Operacion, Cuidado Y Limpieza

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE
ATTEMPTING TO OPERATE YOUR HUMIDIFIER. FOLLOWING
THESE SIMPLE GUIDELINES FOR USE AND CARE WILL HELP
ENSURE YEARS OF DEPENDABLE AND EFFICIENT SERVICE.

IMPORTANT SAFEGUARDS

CAUTION: BECAUSE HIGH TEMPERATURE IS GENERATED IN THIS HUMIDIFIER,
BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED ESPECIALLY
WHEN CHILDREN ARE PRESENT.
WHEN USING ELECTRICAL APPLIANCES, THESE BASIC SAFETY PRECAUTIONS MUST
BE FOLLOWED:
1. DO NOT operate the humidifi er without the water tank.
2. ALWAYS use clean, cool tap water to fi ll the water tank.
3. To avoid risk of fi re or shock, DO NOT use an extension cord.
4. DO NOT handle the unit with wet hands.
5. NEVER tilt, move, or attempt to empty the unit while it is operating or plugged
in. Shut off , unplug and remove water tank before moving unit.
6. DO NOT place the unit close to heated areas, such as near stoves, heaters or in
direct sunlight.
7. DO NOT operate OUTDOORS. This humidifi er is intended for indoor use only.
8. DO NOT let water get into the air inlets on the bottom of the enclosure or on the
cord or plug.
9. DO NOT store or use gasoline or other fl ammable vapors and liquids near the
humidifi er.
10. ALWAYS make sure the water tank cap and gasket are fi rmly in place.
11. DO NOT touch hot surfaces.
12. ALWAYS turn the humidifi er off when the water tanks are empty or when
the unit is not in use. If you turn your unit off for extended periods, ALWAYS
disconnect the power cord and empty the water tank and base.
13. ALWAYS place the unit on a fi rm fl at, level, water resistant surface and arrange
the power cord so that the product is unlikely to be upset.
14. DO NOT clean the product or service the UV bulb without disconnecting the
power cord.
15. Before connecting to electric power outlet, check your electrical power supply.
It must be 120 volts A.C. (alternating current). The outlet may be 15 amp or 20
amp. The circuit must be of adequate size and must be protected by fuse or
circuit breaker.
16. This item has a polarized plug. As a safety feature, this plug will fi t in a polarized
electrical receptacle (outlet) only one way. If the plug does not fi t fully in the
outlet, reverse the plug. If it still does not fi t, contact a qualifi ed electrician.
2
HWM-500_OM.indd 2
HWM-500_OM.indd 2
4/5/07 6:07:40 PM
4/5/07 6:07:40 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido