Key Automation SEL3 Instrucciones Y Advertencias Para Su Instalación Y Uso página 9

INTERNAL RADAR
LOCKED
4.2 RADIO CHANNEL SELECTION
NOTES: To select the radio channel, the receiver and selector DIP-Switches must be in the same position.
CHANNEL
0
1
2
3
4.3 SELECTOR ACTIVITY DISPLAY
Setting the DIP3 of the selector to ON enables the display of the selector activity; a periodic flashing
of the GREEN led and the RED led will be visible if there is a radio transmission. Factory DIP3 is set
to OFF.
SELECTOR LED SIGNAL
DISABLED
ENABLED
4.4 BEEP ACOUSTIC SIGNAL OF THE RECEIVER
Setting the receiver's DIP3 to ON will activate the continuous BEEP acoustic signal for errors; at the
factory the DIP3 is set to OFF (single signal).
RECEIVER BEEP
SINGLE
CONTINUOUS
4.5 DIP SWITCH LEARNING
DESCRIPTION
Press and hold selector button P2 for 1 second
Wait for the green LED of the selector to turn on
Release button P2.
The selector will learn the DIP SWITCHES
BIDIRECTIONAL EXTERNAL RADAR
PHARMACY
DIP-SWITCH 1
OFF
ON
OFF
ON
OPENING
FREE
DIP-SWITCH 2
OFF
OFF
ON
ON
EXAMPLE
P2
GREEN
PARTIAL
+
DELAYED BLOCK
FREQUENCY MHZ
868.32
868.92
869.52
869.85
DIP-SWITCH 3
OFF
ON
DIP-SWITCH 3
OFF
ON
BEEP
>1 s