VDH Titan65 Manual Del Usuario página 4

Titan65 Convertible Safety Seat
Rear-Facing
Recline rear-facing children by
moving the recline stand towards the
front of the seat so that the top of the
safety seat leans back and downward.
Install the safety seat rear-facing and
reclined at the correct angle. Check
to be sure the level arrow located on
the side of the safety seat is level with
the ground. If the safety seat level
arrow is not level with the ground,
check to see if the recline stand is in
the correct position. You may need to
place a tightly rolled towel beneath
the recline stand to help adjust the
safety seat to the correct angle.
Never use the tether strap when the
seat is rear-facing. The tether is made
for use only when forward-facing.
When the tether strap or the lower
anchor connectors are not being
used, hook them to the back of the
seat onto the storage clips.
If the vehicle has an adjustable
head restraint, move it to the lowest
position.
Only use the belt path located at the
front of the safety seat when the seat
is used rear-facing. See labels on the
side of the seat for guidance.
Insert a tightly rolled towel under
recline stand, if needed.
rolled towel
MUST
ARROW
GROUND WHEN USED REAR-FACING
Safety Seat
Label located
on side of
restraint.
3
BE LEVEL WITH
Diagram 2