VDH Titan65 Manual Del Usuario página 8

Basic Use Tips
Titan65 Convertible
Safety Seat
Forward-Facing
Attached
Tether
Always use the tether strap when a
forward-facing safety seat is installed
with the lower anchor connectors
of the Latch system. When installing
with a seat belt, check the vehicle
to see if tether anchors are available
and if so use the tether. Always refer
to the manual for correct usage and
.
weight limits
When the tether or the lower anchor
connectors of the Latch system are
not being used, hook them to the
back of the seat onto the storage
clips.
Check to be sure the safety seat is
installed tightly. Place hands near
the forward-facing belt path used
to install the seat and then push
and pull the safety seat from side to
side across the vehicle cushion. The
seat should not move more than
Forward-
facing
Belt Path
Diagram 5
Always read the child restraint's
instruction booklet for complete
instructions and read your vehicle
owner's manual for correct usage in
your vehicle.
7
one inch. Also check to be sure the
safety seat does move more than
one inch back to front.
If the seat moves more than one
inch in any direction, the seat is too
loose and needs to be tightened.
If the seat is not tightly secured,
try tightening the seat again or try
moving it to another location.
Lower
Anchor
Connector
Stored
Tether
Strap
Stored
Diagram 6