VDH Titan65 Manual Del Usuario página 5

Check to be sure the safety seat is
installed tightly. Place hands near
the rear-facing belt path used to
install the seat and then push and
pull the safety seat from side to side
across the vehicle cushion. The seat
should not move more than one
inch.
Also check to be sure the safety seat
does not move more than one inch
back to front. If the seat moves more
than one inch in any direction, the
seat is too loose and needs to be
tightened. If the seat is not tightly
secured, try tightening the seat
again or try moving it to another
location.
Notes:
Rear-Facing
Place hands near the rear-facing belt
path used to install the seat and then
push and pull the safety seat from side
to side across the vehicle cushion and
back to front.
Always read the safety seat's
instruction booklet for complete
instructions and read the vehicle
owner's manual for correct usage
in that vehicle.
4
Diagram 3