Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6. RADIO OPERATION

1. To select radio band
Press BAND button(4) briefly and repeatedly to select a desired radio band in sequence and circulation as follows:
-->FM1-->FM2-->FM3
2. To search for radio station manually or automatically
Press >>| button (5) briefly to automatically tune up/down for a radio station with a strong signal.
Press and hold >>| button for 1 seconds switch to MANUAL seeking mode, then Press >>| button briefly to manually tune up/down for
your desired radio stations step by step.
It will automatically switch to AUTO mode if no operation was done in about 3 seconds in the MANUAL seeking mode.
3. To store current station or turn on a preset one
1. Press one of the 6 number buttons and hold for more than 1 second to store the current station in the preset memory bank of the
number button for the current band. In this way the unit can store 18 preset stations.
2. Press one of the 6 number buttons briefly to turn on the preset station stored in the preset memory bank of the number button for
the current band.
4. To scan for each preset station or auto search for the strongest stations
When pressing and holding BND button (4) for more than 1 second, the radio searches from the current frequency and checks the
signal strength level until the 6 strongest stations are found. And then the 6 strongest stations are preset to the corresponding preset
memory numbered bank. The auto-storage operation is implemented in the each selected band. When the auto-storage operation is
finished, the radio executes Preset scan.
7. USB & SD OPERATION
1. To insert or pull out SD card or USB stick
When needing to playback SD or USB music, insert SD card or USB stick into the card slot or USB socket, the playing mode will be
changed into SD or USB mode. When SD card and USB stick are both inserted into the slot or socket, the playing mode will be
changed into the mode of the latter one and the play the first track of SD or USB.
2. To select next track to play
Press >>| button (5) to select next or previous track to play.
3. To play fast forward
Press and hold >>| button to play fast forward or backward.
4. To play previous or next 10th track/previous or next folder
Press 5/-10 or 6/+10 button to play previous or next 10th track; Press and hold 5/-10 or 6/+10 button to play previous or next folder.
5. How to use 1/>|| button
During playback, press 1/>|| button to pause playback. When in pause mode, press 1/>|| button to play again.
Press and hold 1/>|| button to select the first track to playback.
6. To scan tracks
During playback, press 2/INT button briefly to play the first 10 seconds of each track, press 2/INT button again to cancel INT function
and retain playing the track currently selected.
7. To repeat track(s)
During playback, press 3/RPT button briefly to play the current track repeatedly, and the LCD will display RPT ONE.
Press RPT button twice RPT ALL function, and the LCD will display RPT ALL.
8. To play tracks in random
During playback, press 4/RDM button briefly to play all tracks in random. Press it again to cancel RDM function.
11
8. BLUETOOTH
1. Pairing
Turn on Bluetooth mode of mobile phone, then select the function for Finding Bluetooth Device and enter it. After finishing finding, it
will show the name of Bluetooth Device if found (name is CAR AUDIO), select it and enter it, then the LCD of the car audio system will
display LINK, BT ON and PHONE one by one.
2. Connection or disconnection
Use mobile phone to do connection or disconnection
3. Dialing when in connection status
To make a call simply enter the number you wish to call using the mobile phone.
4. Accept/ Reject/ End Call
During ringing, press button 3 to accept the call.
During ringing, press button 4 to reject the call.
During talking, press button 4 to end the call.
5. Talking volume level setting
While talking, use volume control to adjust volume level, but this volume level can not be saved.
6. Dialing or receiving calls while the unit is in sleep mode
When the car radio is in standby mode (Acc on and Power off), when dialing or receiving a call, the car radio will power on automati-
cally. After the call is completed, the radio will revert to standby mode.
9.TROUBLE SHOOTING
The car's igni�on switched off
NO POWER OR NO
Cable is not correctly connected.
SOUND
Fuse is burnt
MUCH NOISE IN
Sta�on or signal is too weak.
BROADCASTS
PRESET STATION IS
Ba�ery cable is not correctly
RESET
connected.
USB or SD CARD IS
USB or SD card connec�on is not
CONNECTING BUT NO
good.
SOUND
USB or SD car is damaged or no
music file inside.
If the power supply is properly connected to the car
accessory, switch your igni�on key to ACC or ON
Check connec�on.
Replace the fuse.
Select other sta�ons of stronger signal level.
Connect the ba�ery cable to the terminal that is
always live.
Take it out and insert again.
Change to another USB or SD or record music inside
it.
12

Publicidad

Tabla de contenido
loading

Tabla de contenido