Makita DSC191 Manual De Instrucciones página 4

ENGLISH
(Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Indicator lamps
5. Check button
6. Switch Lock
7. Switch trigger
8. Side A
9. Side B
SPECIFICATIONS
Max. Cutting Capacity (Dia.mm)
Grade 40 - Grade 60
Grade 40: Tensile Strength 490 N/mm
Grade 60: Tensile Strength 620 N/mm
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
4
Explanation of general view
10. Protector
11. Hold Bolt
12. Rebar
13. Blades
14. More than 200 mm
15. Air Hole
16. Hex Wrench
17. Return Valve
18. Blade A (Thicker Blade)
Model
2
70,000 PSI
2
90,000 PSI
Cutting Speed
Overall length
Net weight
Rated voltage
19. Blade B (Thicker Blade)
20. Bolt (Longer)
21. Bolt (Shorter)
22. Washer
23. Bar Holder
24. Cutter Rod
25. Blade A on Bar Holder
26. Blade B on Cutter Rod
27. Spare Blades
6.5 seconds
11.1 - 11.2 kg
BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE /
DC18SF / DC18SH
DSC191
20 mm
412 mm
D.C. 18V