Symbols; Carton Contents - KNOVA KN DP-2000N Manual De Instrucciones

SYMBOLS

Your power tool and its Instruction Manual may contain "WARNING ICONS" (a picture symbol intended to alert you to,
and/or instruct you how to avoid a potentially hazardous condition). Understanding and heeding these symbols will help you
operate your tool better and safer. Shown below are some of the symbols you may see.
SAFETY ALERT:
Precautions that
involve your safety.
PROHIBITION
WEAR EYE
PROTECTION:
Always wear safety
goggles or safety
glasses with side shields.

CARTON CONTENTS

1) Carefully remove the drill press from the carton. With the help of an assistant, place the head assembly on a secure surface
and examine it carefully.
2) Separate and layout all of the parts. Carefully check them according to the diagram below.
WARNING
If any part is missing or damaged, please do not plug in or use the drill press until replacements have been obtained.
Head assembly
Table assembly
Chuck
WEAR A MASK:
Always wear a
face mask or dust mask.
WEAR HEARING PROTECTION:
To reduce the risk of induced hearing
loss, always wear a hearing protection.
READ AND UNDERSTAND
INSTRUCTION MANUAL:
To reduce the risk of injury, user and all
bystanders must read and understand
instruction manual before using this product.
Feed handles
Self-ejecting
chuck key
3 mm & 4 mm
hex keys
6
KEEP HANDS AWAY
FROM BLADE:
Failure to keep your
hands away from the
blade will result in
serious personal injury.
SUPPORT AND
CLAMP WORK
Base
Table lock
handle
Column assembly
Hex bolts