Descargar Imprimir esta página

Specific Safety Warnings - Snapper ESXDCS82 Manual Del Usuario

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 83
EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
SERViCE
„ Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Servicing requires extreme care and
knowledge and should be performed
only by a qualified service technician. For
service we suggest you return the product
to your neatest AUTHORISED SERVICE
CENTRE for repair. When servicing, use
only identical replacement parts.

SPECiFiC SAFETY wARNiNGS

„ Keep all parts of the body away from
the saw chain when the chain saw is
operating. Before you start the chain saw,
make sure the saw chain is not in contact
with anything. A moment of inattention
while operating chain saws may cause
entanglement of your clothing or body with
the saw chain.
„ Hold the power tool by insulated
gripping surfaces only, because the
saw chain many contact hidden wiring.
Saw chains contacting a "live" wire may
make exposed metal parts of the power
tool "live" and could give the operator an
electric shock.
„ Always hold the chain saw with your
right hand at the rear handle and your
left hand at the front handle. Holding
the chain saw with a reversed hand
configuration increases the risk of personal
injury and should never be done.
„ wear
safety
protection. Further protective equipment for
head, hands, legs and feet is recommended.
Adequate protective clothing will reduce
personal injury from flying debris or
accidental contact with the saw chain.
„ Do not operate chain saw while up in a
tree. Operation of a chain saw while up in
a tree may result in personal injury.
„ Always keep proper footing and operate
the chain saw only when standing on
fixed, secure and level surface. Slippery
English (original instructions)
glasses
and
hearing
or unstable surfaces such as ladders may
cause loss of balance or control of the
chain saw.
„ when cutting a limb that is under
tension, be alert of spring back. When
the tension in the wood fibres is released,
the spring loaded limb may strike the
operator and/or throw the chain saw out of
control.
„ Use extreme caution when cutting brush
and saplings. The slender material may
catch the saw chain and be whipped toward
you or pull you off balance.
„ Carry the chain saw by the front handle
with the chain saw switched off and
away from your body. When transporting
or storing the chain saw, always fit the guide
bar cover. Proper handling of the chain
saw will reduce the likelihood of accidental
contact with the moving saw chain.
„ Follow instructions for lubricating, chain
tensioning and changing accessories.
Improperly tensioned or lubricated chain
may either break or increase the chance
for kickback.
„ Keep handles dry, clean, and free from
oil and grease. Greasy, oily handles are
slippery, causing loss of control.
„ Cut wood only. Do not use chain saw
for purposes not intended. For example:
do not use chain saw for cutting plastic,
masonry or non-wood building materials.
Use of the chain saw for operations other
than intended could result in a hazardous
situation.
3

Publicidad

loading

Este manual también es adecuado para:

1696774